High Quality PSD CNC Gantry Moveable Drilling Machine
Chigadzirwa chimiro chimiro
1.Adopt Taiwan BT50 yakakwirira-yakaoma yepakati-spray spindle.
2. Nzvimbo ina dzekugadzirisa, 12 seti ye hydraulic automatic clamps.Inogonesa kumira nekukurumidza uye kusimbisa.
3. Iyo worktable inotora kusanganiswa kwe hydraulic clamp uye T-slot.
Technical Parameter
| Parameter name | Item | PSD2016 | PSD2020 | PSD3016 | PSD4030 | |
| Saizi yebasa | (mm） Kugadzira stack ukobvu (mm) | 100 | ||||
| Kureba × Kufara (mm) | 2000×1600 | 2000 × 2000 | 3000×1600 | 4000 × 300 0 | ||
| Kutsvedza CNC simba musoro | Spindle taper gomba | BT50 | ||||
| Kuchera dhayamita (mm) | φ50 (Inosarudzika φ63) | |||||
| Kubata dhayamita (mm) | M30 | |||||
| Spindle kumhanya (rpm) | 30-3000 (frequency conversionless stepless) | |||||
| Spindle mota simba (KW) | 11/15/22 | |||||
| Torque (n≤600r/min) | 190/240/360Nm | |||||
| Spindle pamusoro kune worktablechinhambwe (mm) | 230-630 | |||||
| Longitudinal kufamba kwe gantry (X axis) | Maximum sitiroko (mm) | 2000 | 2000 | 3000 | ||
| Kumhanya kwakanyanya (m/min) | 10 | |||||
| Servo mota simba (KW) | 2×2 | 2×2 | 2×2 | 2.5 × 2 | ||
| kufamba kwemusoro wesimba (Y axis) | Maximum sitiroko (mm) | 1600 | 2000 | 1600 | 3000 | |
| Kumhanya kwakanyanya (m/min) | 10 | |||||
| Servo mota simba (KW) | 2 | 2 | 2 | 2.5 | ||
| Simba musoro wakatwasuka kufamba (Z axis) | Maximum sitiroko (mm) | 400 | ||||
| Kumhanya kwakanyanya (m/min) | 8 | |||||
| Servo mota simba (KW) | 2 | 2 | 2 | ||
| Machining kururama | Kumira kwechokwadi (mm) | 0.05/1000 | |||
| Dzokorora kurongeka kwenzvimbo (mm) | 0.03/1000 | ||||
| kutonhora system | kutonhora nzira | Kutonhora kwemukati + kutonhora kwekunze | |||
| Internal cooling pressure (Mpa) | 1.5Mpa | ||||
| Yemukati inotonhorera pombi mota simba (KW) | 4KW | ||||
| External cooling pressure (Mpa) | 0.3Mpa | ||||
| Kunze kutonhora pombi mota simba (KW) | 0.75 | ||||
| Chip kubvisa system | Chip conveyor fomu | flat cheni | |||
| Chip conveyor kumhanya (m/min) | 1 | ||||
| Chip conveyor mota simba | 0.75kw | ||||
| Hydraulic system | Pressure (Mpa) | 6 | |||
| Fuel tank capacity (L) | 100L | ||||
| Basachidimbukubata | Kurovera ukobvu (mm) | 15～100 | |||
| Nhamba yeClamping Cylinders (pcs) | 12 | ||||
| Simba rekudzivirira (KN) | 7.5 | ||||
| control method | Button control (foot switch) | ||||
| magetsi ekudzora hurongwa | CNC system | KND K1000+ | |||
| Nhamba ye CNC axes | 3+1 | ||||
| otomatiki lubrication system | Lubrication pressure | 2MPa | |||
| Lubrication point yekuzadza huwandu | 0.1ml | ||||
| Lubrication cycle | 6-10min | ||||
| Dimensions | Kureba × Kufara × Kureba (m) | 4X2.7X2.5 | 4X3.2X2.5 | 5X2.7X2.5 | |
| Huremu (T) | 7.5 | 8 | 8.5 | ||
Application
Iyi nhevedzano inogona kuita drilling, mwenje milling uye kubaya pamahwendefa ekubatanidza, flanges, anchor plates, tube sheet parts, uye kupisa ma plates mukativakawandaminda yesimbishongwe, zvivakwa zvesimbi, petrochemicals, simba remhepo, simba renyukireya, uye boilers.
